Contents

-. Build : WizFi630A 개발환경 구축

-. Upgrade : TFTP 활용


Upgrade : TFTP 활용

WizFi630A in OpenWrt

>> 참조 링크

https://wiki.openwrt.org/toh/wiznet/wiznet_wizfi630a

>> tftp 설치

>> /etc/xinetd.d/tftp 파일 생성 및 수정

>> tftp root 디렉토리 생성 및 서비스 실행

>> Upgrade binary 복사


>> Upgrade log

U-Boot 1.1.3 (Mar  1 2016 - 13:35:45)                                           

                                                                                

Board: Ralink APSoC DRAM:                                                       

 Return Real size =33554432 !!                                                  

32 MB                                                                           

relocate_code Pointer at: 81fb4000                                              

******************************                                                  

Software System Reset Occurred                                                  

******************************                                                  

spi_wait_nsec: 21                                                               

spi device id: ef 40 18 0 0 (40180000)                                          

find flash: W25Q128FV                                                           

raspi_read: from:30000 len:1000                                                 

.raspi_read: from:30000 len:1000                                                

.============================================                                   

Ralink UBoot Version: 3.5.0.0                                                   

--------------------------------------------                                    

ASIC 5350_MP (Port5<->None)                                                     

DRAM_CONF_FROM: Boot-Strapping                                                  

DRAM_TYPE: SDRAM                                                                

DRAM_SIZE: 256 Mbits                                                            

DRAM_WIDTH: 16 bits                                                             

DRAM_TOTAL_WIDTH: 16 bits                                                       

TOTAL_MEMORY_SIZE: 32 MBytes                                                    

Flash component: SPI Flash                                                      

Date:Mar  1 2016  Time:13:35:45                                                 

============================================                                    

icache: sets:256, ways:4, linesz:32 ,total:32768                                

dcache: sets:128, ways:4, linesz:32 ,total:16384                                

                                                                                

 ##### The CPU freq = 360 MHZ ####                                              

 estimate memory size =32 Mbytes                                                

                                                                                

Please choose the operation:                                                    

   1: Load system code to SDRAM via TFTP.                                       

   2: Load system code then write to Flash via TFTP.                            

   3: Boot system code via Flash (default).                                     

   4: Entr boot command line interface.                                         

   7: Load Boot Loader code then write to Flash via Serial.                     

   9: Load Boot Loader code then write to Flash via TFTP.                       

                                                                                

You choosed 2  <<= 2번선택                                                                   

                                                                                

 0                                                                              

raspi_read: from:40028 len:6                                                    

.                                                                               

                                                                                

2: System Load Linux Kernel then write to Flash via TFTP.                       

 Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)           

 Please Input new ones /or Ctrl-C to discard                                    

        Input device IP (10.10.10.123) ==:192.168.0.20  <<= 임의 IP 할당                          

        Input server IP (10.10.10.3) ==:192.168.0.2  <<= tftp서버 IP 입력                                

        Input Linux Kernel filename () ==:wizfi630a.bin  <<= 복사된 binary 파일명 입력                         

                                                                                

 netboot_common, argc= 3                                                        

                                                                                

 NetTxPacket = 0x81FE5F40                                                       

                                                                                

 KSEG1ADDR(NetTxPacket) = 0xA1FE5F40                                            

                                                                                

 NetLoop,call eth_halt !                                                        

                                                                                

 NetLoop,call eth_init !                                                        

Trying Eth0 (10/100-M)                                                          

                                                                                

 Waitting for RX_DMA_BUSY status Start... done                                  

                                                                                

                                                                                

 Header Payload scatter function is Disable !!                                  

                                                                                

 ETH_STATE_ACTIVE!!                                                             

Using Eth0 (10/100-M) device                                                    

TFTP from server 192.168.0.2; our IP address is 192.168.0.20                    

Filename 'wizfi630a.bin'.                                                       

                                                                                

 TIMEOUT_COUNT=10,Load address: 0x80100000                                      

Loading: *                                                                      

ArpTimeoutCheck                                                                 

T T T T Got ARP REPLY, set server/gtwy eth addr (bc:5f:f4:da:9c:bb)             

Got it                                                                          

#################################################################               

         #################################################################      

         #################################################################      

         #################################################################      

         #################################################################      

         #################################################################      

         #################################################################      

         #################################################################      

         #################################################################      

         #################################################################      

         #################################################################      

         #################################################################      

         ########################################                               

done                                                                            

Bytes transferred = 4194308 (400004 hex)                                        

NetBootFileXferSize= 00400004                                                   

raspi_erase_write: offs:50000, count:400004                                     

raspi_erase: offs:50000 len:400000                                              

................................................................                

raspi_write: to:50000 len:400000                                                

................................................................                

raspi_read: from:50000 len:10000                                                

.raspi_read: from:60000 len:10000                                               

.raspi_read: from:70000 len:10000                                               

.raspi_read: from:80000 len:10000                                               

.raspi_read: from:90000 len:10000                                               

.raspi_read: from:a0000 len:10000                                               

.raspi_read: from:b0000 len:10000                                               

.raspi_read: from:c0000 len:10000                                               

.raspi_read: from:d0000 len:10000                                               

.raspi_read: from:e0000 len:10000                                               

.raspi_read: from:f0000 len:10000                                               

.raspi_read: from:100000 len:10000                                              

.raspi_read: from:110000 len:10000                                              

.raspi_read: from:120000 len:10000                                              

.raspi_read: from:130000 len:10000                                              

.raspi_read: from:140000 len:10000                                              

.raspi_read: from:150000 len:10000                                              

.raspi_read: from:160000 len:10000                                              

.raspi_read: from:170000 len:10000                                              

.raspi_read: from:180000 len:10000                                              

.raspi_read: from:190000 len:10000                                              

.raspi_read: from:1a0000 len:10000                                              

.raspi_read: from:1b0000 len:10000                                              

.raspi_read: from:1c0000 len:10000                                              

.raspi_read: from:1d0000 len:10000                                              

.raspi_read: from:1e0000 len:10000                                              

.raspi_read: from:1f0000 len:10000                                              

.raspi_read: from:200000 len:10000                                              

.raspi_read: from:210000 len:10000                                              

.raspi_read: from:220000 len:10000                                              

.raspi_read: from:230000 len:10000                                              

.raspi_read: from:240000 len:10000                                              

.raspi_read: from:250000 len:10000                                              

.raspi_read: from:260000 len:10000                                              

.raspi_read: from:270000 len:10000                                              

.raspi_read: from:280000 len:10000                                              

.raspi_read: from:290000 len:10000                                              

.raspi_read: from:2a0000 len:10000                                              

.raspi_read: from:2b0000 len:10000                                              

.raspi_read: from:2c0000 len:10000                                              

.raspi_read: from:2d0000 len:10000                                              

.raspi_read: from:2e0000 len:10000                                              

.raspi_read: from:2f0000 len:10000                                              

.raspi_read: from:300000 len:10000                                              

.raspi_read: from:310000 len:10000                                              

.raspi_read: from:320000 len:10000                                              

.raspi_read: from:330000 len:10000                                              

.raspi_read: from:340000 len:10000                                              

.raspi_read: from:350000 len:10000                                              

.raspi_read: from:360000 len:10000                                              

.raspi_read: from:370000 len:10000                                              

.raspi_read: from:380000 len:10000                                              

.raspi_read: from:390000 len:10000                                              

.raspi_read: from:3a0000 len:10000                                              

.raspi_read: from:3b0000 len:10000                                              

.raspi_read: from:3c0000 len:10000                                              

.raspi_read: from:3d0000 len:10000                                              

.raspi_read: from:3e0000 len:10000                                              

.raspi_read: from:3f0000 len:10000                                              

.raspi_read: from:400000 len:10000                                              

.raspi_read: from:410000 len:10000                                              

.raspi_read: from:420000 len:10000                                              

.raspi_read: from:430000 len:10000                                              

.raspi_read: from:440000 len:10000                                              

.raspi_read: from:450000 len:10000                                              

.raspi_erase: offs:450000 len:10000                                             

.                                                                               

raspi_write: to:450000 len:10000                                                

.                                                                               

raspi_read: from:450000 len:10000                                               

.Done!                                                                          

## Booting image at bc050000 ...                                                

raspi_read: from:50000 len:40                                                   

.   Image Name:   MIPS OpenWrt Linux-4.4.14                                     

   Created:      2017-05-24  14:54:37 UTC                                       

   Image Type:   MIPS Linux Kernel Image (lzma compressed)                      

   Data Size:    1216606 Bytes =  1.2 MB                                        

   Load Address: 80000000                                                       

   Entry Point:  80000000                                                       

raspi_read: from:50040 len:12905e                                               

...................   Verifying Checksum ... OK                                 

   Uncompressing Kernel Image ... OK                                            

No initrd                                                                       

## Transferring control to Linux (at address 80000000) ...                      

## Giving linux memsize in MB, 32                                               

linux_argv[0] = <NULL>                                                          

linux_env = �7�����7��7��7��7�                                             

                                                                                

Starting kernel ...                                                             

                                                                                

[    0.000000] Linux version 4.4.14 (bingdo@bingdo-desktop) (gcc version 5.3.0 7

[    0.000000] SoC Type: Ralink RT5350 id:1 rev:3                               

[    0.000000] bootconsole [early0] enabled                                     

[    0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)                          

[    0.000000] MIPS: machine is WIZnet WizFi630A                                

[    0.000000] Determined physical RAM map:                                     

[    0.000000]  memory: 02000000 @ 00000000 (usable)                            

[    0.000000] Initrd not found or empty - disabling initrd                     

[    0.000000] Zone ranges:                                                     

[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000001ffffff]           

[    0.000000] Movable zone start for each node                                 

[    0.000000] Early memory node ranges                                         

[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000001ffffff]          

[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff] 

[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.  

[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bys

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pa8

[    0.000000] Kernel command line: console=ttyS1,115200 rootfstype=squashfs,jf2

[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)               

[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)    

[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)      

[    0.000000] Writing ErrCtl register=00001fd0                                 

[    0.000000] Readback ErrCtl register=00001fd0                                

[    0.000000] Memory: 28488K/32768K available (2751K kernel code, 125K rwdata,)

[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1       

[    0.000000] NR_IRQS:256                                                      

[    0.000000] CPU Clock: 360MHz                                                

[    0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_s

[    0.000000] systick: running - mult: 214748, shift: 32                       

[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_s

[    0.000016] sched_clock: 32 bits at 180MHz, resolution 5ns, wraps every 1193s

[    0.007697] Calibrating delay loop... 239.61 BogoMIPS (lpj=1198080)          

[    0.080250] pid_max: default: 32768 minimum: 301                             

[    0.084964] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)      

[    0.091394] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) 

[    0.107822] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms

[    0.117766] pinctrl core: initialized pinctrl subsystem                      

[    0.124158] NET: Registered protocol family 16                               

[    0.172470] rt2880_gpio 10000600.gpio: registering 22 gpios                  

[    0.177905] rt2880_gpio 10000600.gpio: registering 22 irq handlers           

[    0.184411] rt2880_gpio 10000660.gpio: registering 6 gpios                   

[    0.189744] rt2880_gpio 10000660.gpio: registering 6 irq handlers            

[    0.198693] clocksource: Switched to clocksource MIPS                        

[    0.206356] NET: Registered protocol family 2                                

[    0.212343] TCP established hash table entries: 1024 (order: 0, 4096 bytes)  

[    0.219234] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)         

[    0.225384] TCP: Hash tables configured (established 1024 bind 1024)         

[    0.231857] UDP hash table entries: 256 (order: 0, 4096 bytes)               

[    0.237520] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)          

[    0.244274] NET: Registered protocol family 1                                

[    0.249568] rt-timer 10000100.timer: maximum frequency is 3662Hz             

[    0.257280] futex hash table entries: 256 (order: -1, 3072 bytes)            

[    0.308059] squashfs: version 4.0 (2009/01/31) Phillip Lougher               

[    0.313856] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORI.

[    0.330225] io scheduler noop registered                                     

[    0.334010] io scheduler deadline registered (default)                       

[    0.339600] ralink-usb-phy usbphy: invalid resource                          

[    0.345128] gpio-export gpio-export: 0 gpio(s) exported                      

[    0.350846] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled         

[    0.359634] 10000500.uart: ttyS0 at MMIO 0x10000500 (irq = 13, base_baud = 23

[    0.370336] console [ttyS1] disabled                                         

[    0.373835] 10000c00.uartlite: ttyS1 at MMIO 0x10000c00 (irq = 20, base_baud3

[    0.383580] console [ttyS1] enabled                                          

[    0.383580] console [ttyS1] enabled                                          

[    0.390681] bootconsole [early0] disabled                                    

[    0.390681] bootconsole [early0] disabled                                    

[    0.409919] spi spi0.0: force spi mode3                                      

[    0.414730] m25p80 spi0.0: w25q128 (16384 Kbytes)                            

[    0.419732] 4 ofpart partitions found on MTD device spi0.0                   

[    0.425341] Creating 4 MTD partitions on "spi0.0":                           

[    0.430301] 0x000000000000-0x000000030000 : "uboot"                          

[    0.439213] 0x000000030000-0x000000040000 : "uboot-env"                      

[    0.448455] 0x000000040000-0x000000050000 : "factory"                        

[    0.457685] 0x000000050000-0x000001000000 : "firmware"                       

[    0.544317] 2 uimage-fw partitions found on MTD device firmware              

[    0.550504] 0x000000050000-0x00000017909e : "kernel"                         

[    0.559061] 0x00000017909e-0x000001000000 : "rootfs"                         

[    0.568034] mtd: device 5 (rootfs) set to be root filesystem                 

[    0.574143] 1 squashfs-split partitions found on MTD device rootfs           

[    0.580560] 0x000000440000-0x000001000000 : "rootfs_data"                    

[    0.595952] rt3050-esw 10110000.esw: link changed 0x00                       

[    0.605040] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb5

[    0.614744] rt2880_wdt 10000120.watchdog: Initialized                        

[    0.622927] NET: Registered protocol family 10                               

[    0.635855] NET: Registered protocol family 17                               

[    0.640790] bridge: automatic filtering via arp/ip/ip6tables has been deprec.

[    0.653831] 8021q: 802.1Q VLAN Support v1.8                                  

[    0.676668] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. 

[    0.685944] Freeing unused kernel memory: 180K (80373000 - 803a0000)         

[    3.086112] init: Console is alive                                           

[    3.090385] init: - watchdog -                                               

[    5.267686] usbcore: registered new interface driver usbfs                   

[    5.273678] usbcore: registered new interface driver hub                     

[    5.279483] usbcore: registered new device driver usb                        

[    5.296553] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver       

[    5.306132] ehci-platform: EHCI generic platform driver                      

[    5.322256] phy phy-usbphy.0: remote usb device wakeup disabled              

[    5.328333] phy phy-usbphy.0: UTMI 16bit 30MHz                               

[    5.332995] ehci-platform 101c0000.ehci: EHCI Host Controller                

[    5.339032] ehci-platform 101c0000.ehci: new USB bus registered, assigned bu1

[    5.347391] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000           

[    5.368833] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00          

[    5.377718] hub 1-0:1.0: USB hub found                                       

[    5.382540] hub 1-0:1.0: 1 port detected                                     

[    5.397544] init: - preinit -                                                

[    6.496392] rt3050-esw 10110000.esw: link changed 0x00                       

Press the [f] key and hit [enter] to enter failsafe mode                        

Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level    

[    6.827233] random: procd urandom read with 11 bits of entropy available     

[    8.136889] rt3050-esw 10110000.esw: link changed 0x02                       

[   10.217278] mount_root: jffs2 not ready yet, using temporary tmpfs overlay   

[   10.275670] procd: - early -                                                 

[   10.279068] procd: - watchdog -                                              

[   11.380848] procd: - ubus -                                                  

[   11.440191] procd: - init -                                                  

Please press Enter to activate this console.                                    

[   12.710961] ip6_tables: (C) 2000-2006 Netfilter Core Team                    

[   12.744086] Loading modules backported from Linux version wt-2016-05-12-0-g76

[   12.751976] Backport generated by backports.git backports-20160216-0-ge3c56e4

[   12.767462] ip_tables: (C) 2000-2006 Netfilter Core Team                     

[   12.792994] nf_conntrack version 0.5.0 (447 buckets, 1788 max)               

[   12.869623] xt_time: kernel timezone is -0000                                

[   12.982450] PPP generic driver version 2.4.2                                 

[   12.993168] NET: Registered protocol family 24                               

[   13.050600] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5350, rev 0500 d

[   13.058559] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5350 detected   

[   21.372585] rt3050-esw 10110000.esw: link changed 0x00                       

[   22.989706] rt3050-esw 10110000.esw: link changed 0x02                       

[   31.880146] device eth0.1 entered promiscuous mode                           

[   31.885078] device eth0 entered promiscuous mode                             

[   31.921814] br-lan: port 1(eth0.1) entered forwarding state                  

[   31.927623] br-lan: port 1(eth0.1) entered forwarding state                  

[   33.918775] br-lan: port 1(eth0.1) entered forwarding state                  

[   58.161822] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0   

[   58.179218] jffs2_build_filesystem(): unlocking the mtd device... done.      

[   58.186007] jffs2_build_filesystem(): erasing all blocks after the end marke 

[   79.588798] random: nonblocking pool is initialized


+ Recent posts