오픈 소스 연구소

Chat by using websocket on WIZwiki-W7500 platform

Recently WIZwiki-W7500 platform was announced by WIZnet. So I implemented a firmware of WIZwiki-W7500 by changing UART definition
because I can handle a source code easily.
You can know www.mbed.org site. Please refer to the following step.

Step1 : Prepare materials

Please refer to the following.
1. WIZwiki-W7500 board x2. ( http://www.shopwiznet.com/wizwiki-7500 )
2. Mini USB cable
3. LAN cable

Step2 : Hardware connection

Please connect an USB cable and LAN cable.
You can get more HW info by the following site.
http://wizwiki.net/wiki/doku.php?id=products:wizwiki_w7500:start

Step3 : Prepare development environment

I prepared cloud development environment by the following site.
https://developer.mbed.org/getting-started/
<Reference>
WIZwiki-W7500 example source : https://developer.mbed.org/platforms/WIZwiki-W7500/
WIZwiki-W7500 library source : https://developer.mbed.org/teams/WIZnet/code/WIZnetInterface/

Step4 : Software : mbed repository

I opened source codes of this project in mbed site.
https://developer.mbed.org/users/bingdo/code/WebSocketClient_Chat_WIZwiki-W7500/
You can import this project files into your workspace.
You must modify source codes for this test. (MAC address, websocket server IP & port)
After compile, you can run an application of WIZwiki-W7500.
This project is open for everyone. I expect your participation to improve a quality of project.

<Reference>
Websocket Server example : https://github.com/bingdo/ChatDemoWithWebSocket

Step5 : How to run : Test result

1. To modify MAC address and websocket server IP & port as your case.
2. To compile a project in cloud.
3. To program FW into targets.
4. To run Websocket server on your PC.
5. To activate each connection with serial terminal.
6. To reset targets.
7. To insert chat messages after connecting with websocket server.
You can see the test result.

Thank you for your attention.
*Tip : If you register in www.wiznetian.com and work actively, you can get a sample cheaper than E-sales as well as a free sample.

Telemedicine by using WIZwiki-W7500 and BLE

Recently WIZwiki-W7500 platform was announced by WIZnet. So I implemented a firmware of WIZwiki-W7500 by changing UART definition because I can handle a source code easily.
You can know the value of BLE sensor even if it is so far. Please refer to the following step.

Step 1: repare materials

Please refer to the following.
1. WIZwiki-W7500 board. ( http://www.shopwiznet.com/wizwiki-7500 )
2. Mini USB cable
3. LAN cable
4. nRF51822-mKIT ( https://developer.mbed.org/platforms/Nordic-nRF51822/ )

Step 2: Hardware connection

Please connect an USB cable and LAN cable.
You can get more HW info by the following site.
http://wizwiki.net/wiki/doku.php?id=products:wizwiki_w7500:start

Step 3: Prepare development environment

I prepared GCC development environment by the following site.
http://opensrclab.tistory.com/33
I installed GNU Toolchain, Java JDK, Eclipse, Cygwin.
If you install all tools, you are ready for running this project.
You can use a Configuration Tool by the following temporarily.
http://wizwiki.net/wiki/doku.php?id=products:wiz550s2e:wiz550s2e_download
How to use a CFG tool : http://wizwiki.net/wiki/doku.php?id=products:wiz550s2e:wiz550s2epg_en#configuration_tool
<Reference>
WIZwiki-W7500 library source : http://wizwiki.net/wiki/doku.php?id=products:w7500:library

Step 4: Software : GitHub repository

I opened source codes of this project in GitHub.
https://github.com/bingdo/S2EApp_WIZwiki-W7500_Eclipse
You can download this project files. And then import project into Eclipse.
You must modify source codes for this test.
ConfigData.c

retarget.c

uartHandler.h

After compile, you can run S2E application of WIZwiki-W7500.
This project is open for everyone. I expect your participation to improve a quality of project.

 S2EApp_WIZwiki-W7500_Eclipse.bin

Step 5: How to run : Test result

1. To program FW into a target.
2. To reset a target and insert MAC address.

3. To search a target by Configuration Tool.
4. To check Host IP and start Server.
5. To change IP, Gateway, HostIP properly.
6. To change Working Mode of target to TCP Client or Mixed Mode by CFG tool.
7. To connect with nRF51822-mKIT(Central) through UART0.
8. Turn nRF51822-mKIT(Peripheral) on.

You can see the test result.
Thank you for your attention.
*Tip : If you register in www.wiznetian.com and work actively, you can get a sample cheaper than E-sales as well as a free sample.