Intro : Turn on the light by WIZwiki IoT platform

Recently WIZwiki-W7500 platform was announced by WIZnet. So I implemented a firmware of WIZwiki-W7500 by WIZ550web SW modification because I can handle a source code easily.
You can use the web page on home networking. Please refer to the following step.

Step 1: Prepare materials


Please refer to the following.
1. WIZwiki-W7500 board. ( )
2. Mini USB cable
3. LAN cable
4. UART2USB adapter

Step 2: Hardware connection


Please connect an USB, LAN cable and UART2USB adapter
You can get more HW info by the following site.

Step 3: Prepare development environment

I prepared GCC development environment by the following site.
I installed GNU Toolchain, Java JDK, Eclipse, Cygwin.
If you install all tools, you are ready for running this project.
You can use a Configuration Tool by the following site temporarily.
How to use a CFG tool :
WIZ550web source repository :
WIZwiki-W7500 library source :

Step 4: Software : GitHub repository

I opened source codes of this project in GitHub.
You can download this project files. And then import project into Eclipse.
After compile, you can run WEB application of WIZwiki-W7500.
This project is not finished yet. This is open for everyone. I expect your participation to improve a quality of project.



Step 5: How to run : Test result

1. To program FW into a target.
2. To reset a target and insert MAC address.
3. To search a target by Configuration Tool.
4. To change IP, Gateway properly.
5. To connect to a target by ALFTP.
6. To upload web page to a target.
7. To connect to a target by browser program.
8. To control lights through web page.
You can see the test result by the video.
Thank you for your attention.
*Tip : If you register in and work actively, you can get a sample cheaper than E-sales as well as a free sample.



+ Recent posts