Intro : Turn on the light by WIZwiki IoT platform

Recently WIZwiki-W7500 platform was announced by WIZnet. So I implemented a firmware of WIZwiki-W7500 by WIZ550web SW modification because I can handle a source code easily.
You can use the web page on home networking. Please refer to the following step.

Step 1: Prepare materials

 

Please refer to the following.
1. WIZwiki-W7500 board. ( http://www.shopwiznet.com/wizwiki-7500 )
2. Mini USB cable
3. LAN cable
4. UART2USB adapter

Step 2: Hardware connection

 

Please connect an USB, LAN cable and UART2USB adapter
You can get more HW info by the following site.
http://wizwiki.net/wiki/doku.php?id=products:wizwiki_w7500:start

Step 3: Prepare development environment

I prepared GCC development environment by the following site.
http://opensrclab.tistory.com/33
I installed GNU Toolchain, Java JDK, Eclipse, Cygwin.
If you install all tools, you are ready for running this project.
You can use a Configuration Tool by the following site temporarily.
http://wizwiki.net/wiki/doku.php?id=products:wiz550s2e:wiz550s2e_download
How to use a CFG tool : http://wizwiki.net/wiki/doku.php?id=products:wiz550s2e:wiz550s2epg_en#configuration_tool
<Reference>
WIZ550web source repository : https://github.com/Wiznet/WIZ550web
WIZwiki-W7500 library source : http://wizwiki.net/wiki/doku.php?id=products:w7500:library

Step 4: Software : GitHub repository

I opened source codes of this project in GitHub.
https://github.com/bingdo/WEBApp_WIZwiki-W7500_Eclipse
You can download this project files. And then import project into Eclipse.
After compile, you can run WEB application of WIZwiki-W7500.
This project is not finished yet. This is open for everyone. I expect your participation to improve a quality of project.

 WEBApp_WIZwiki-W7500_Eclipse.bin

 

Step 5: How to run : Test result

1. To program FW into a target.
2. To reset a target and insert MAC address.
3. To search a target by Configuration Tool.
4. To change IP, Gateway properly.
5. To connect to a target by ALFTP.
6. To upload web page to a target.
7. To connect to a target by browser program.
8. To control lights through web page.
You can see the test result by the video.
Thank you for your attention.
*Tip : If you register in http://www.wiznetian.com/ and work actively, you can get a sample cheaper than E-sales as well as a free sample.

 

 

Intro: How to monitor a remote equipment by WIZwiki platform
I know WIZ550S2E solution for monitoring. Recently WIZwiki-W7500 platform was announced by WIZnet. So I implemented a firmware of WIZwiki-W7500 by WIZ550S2E SW modification because I can handle a source code easily.
You can know the status of equipment even if it is so far. Please refer to the following step.

 

Step 1: Prepare materials
Please refer to the following.
1. WIZwiki-W7500 board. ( http://www.shopwiznet.com/wizwiki-7500 )
2. Mini USB cable
3. LAN cable

Step 2: Hardware connection
Please connect an USB cable and LAN cable.
You can get more HW info by the following site.
http://wizwiki.net/wiki/doku.php?id=products:wizwiki_w7500:start

 

Step 3: Prepare development environment
I prepared GCC development environment by the following site.
http://opensrclab.tistory.com/33
I installed GNU Toolchain, Java JDK, Eclipse, Cygwin.
If you install all tools, you are ready for running this project.
You can use a Configuration Tool by the following site temporarily.
http://wizwiki.net/wiki/doku.php?id=products:wiz550s2e:wiz550s2e_download
How to use a CFG tool : http://wizwiki.net/wiki/doku.php?id=products:wiz550s2e:wiz550s2epg_en#configuration_tool
<Reference>
WIZ550S2E source repository : https://github.com/Wiznet/WIZ550S2E
WIZwiki-W7500 library source : http://wizwiki.net/wiki/doku.php?id=products:w7500:library

Step 4: Software : GitHub repository
I opened source codes of this project in GitHub.
https://github.com/bingdo/S2EApp_WIZwiki-W7500_Eclipse
You can download this project files. And then import project into Eclipse.
After compile, you can run S2E application of WIZwiki-W7500.
This project is open for everyone. I expect your participation to improve a quality of project.

 S2EApp_WIZwiki-W7500_Eclipse.bin

 

 

Step 5: How to run : Test result
1. To program FW into a target.
2. To reset a target and insert MAC address.
3. To search a target by Configuration Tool.
4. To check Host IP and start Server.
5. To change IP, Gateway, HostIP properly.
6. To change Working Mode of target to TCP Client or Mixed by CFG tool.
7. Send "hello" to Server through terminal program.
You can see the test result by the video.
Thank you for your attention.
*Tip : If you register in http://www.wiznetian.com/ and work actively, you can get a sample cheaper than E-sales as well as a free sample.

 

 

 

 

W5500EVB(WIZnet)+ioLibrary Tutorial UCC

-. YouTube 동영상입니다.

 

 

 

+ Recent posts